Either way, you’ll be given the option to restart your PC or return to the Advanced Options page. If your Windows PC is throwing an error message at you before it even begins to load Windows, it’s possible that the boot sector on your system partition is damaged, corrupted, or has missing files.
How To Start The Command Prompt When Windows Won’t Load Successfully
Check your computer’s documentation or the BIOS manufacturer’s website for information on decoding these beeps. Here at Geeks on Site, we receive thousands of calls each year from customers whose computers won’t boot or who receive error messages during the startup process. There are literally thousands of messages that could appear when you have this problem so it’s difficult to consider them all. However, there are several common ones that seem to occur often.
Be sure to use media that matches the version of Windows you’re trying to recover—for example, Windows 10 installation media for a Windows 10 PC or Windows 7 installation media for a Windows 7 PC. If you don’t have Windows installation media lying around, you can download a Windows 7, 8, or 10 ISO from Microsoft and either burn it to disc or copy it to a USB drive. This tool is available on Windows 7, 8, and 10.
If the Quick Test does not find a problem, run the Extensive Test (about 45 minutes) which also has a Loop Until Error option. If you are ready to run the tests, use the instructions in the following sections. Start by using the System Fast Test to quickly identify hardware issues.
After running the Fast Test, if no errors are found but your computer is still exhibiting symptoms of a hardware problem, run the Extensive Test. Many computer problems are related to soft failures (or degraded performance) on the hard drive. The HP Hard Drive Self Test will repair soft errors on the hard drive, but it will not report the errors. After the test is complete, restart the computer to see if test repaired the problem you may been experiencing.
You can access it from the built-in Windows recovery tools (if they built properly), recovery media, or a Windows installation disc. This solution doesn’t need the original Windows install CD.
- If the blue screen appears again shortly after the PC starts, this could be an indication of defective hardware that will potentially need to be repaired.
- If your blue screen error disappears, it’s highly likely that a system or driver update was the problem.
- Usually, the computer will restart normally following a blue screen.
- Then you can try to find out what caused the issue.
- Among the options, find “Last Known Good Configuration”.
Consult your computer’s documentation for instructions on opening the BIOS setup screen and setting drive configuration options. Preset audible error signals are programmed into the motherboard’s BIOS chip. These beeps indicate a variety of issues on the motherboard.
Insert the Windows 7 installation media in the appropriate drive and reboot the computer. Check your BIOS settings to insure your computer is configured to boot from the optical drive.
How To Fix "Your Pc Ran Into A Problem And Needs To Restart" Blue Screen Error
If you think there is a problem with the memory, first try the Fast Test (3 to 5 minutes). If the Fast Test does not find a problem, run the Quick Test (about 10 minutes).
How To Fix Errors Seen During The Computer Startup Process
While boot loader errors can be a bit intimidating when they pop up—mostly because of how little information you’re given when they happen—they are reasonably easy to repair. You just have to know what to look out for and have a recovery solution ready to load. Once you’re at the Command Prompt, you’ll be using https://wikidll.com/ the bootrec command, and there are a couple of options that can be useful in fixing bootloader errors. When the process is complete, Windows will let you know whether the repairs were successful.